Bedroom – Senior.com
Go toLog in Go toSign up
Covid 19 Rapid Test Kits Now In Stock! Limited Supply

Bedroom

Bedroom
Browse through a variety of products and categories specifically for the bedroom including safety items, mattresses, beds & bed packages, underpads and incontinence aids, bed sheets and pillows, bedroom furniture and much more!
Collection Menu
On Sale $899.00 $475.00

The Med Aire Alternating Pressure Mattress Replacement System with Low Air Loss by Drive Medical provides alternating pressure and is designed to be used in the prevention, treatment and management of Pressure Ulcers.

The mattress has 20 air bladders, nine with laser holes to achieve the low air loss function and to increase patients comfort by keeping the affected area cool and dry ensuring a speedy recovery. The Aire cells are 8" high and are constructed with 40% nylon/60% PVC for longevity and durability. The zippered mattress cover is constructed with a quilted, urethane coated, nylon fabric which is, water resistant, vapor permeable, machine washable and low sheer safeguarding the patients skin and comfort.

The "Whisper Quiet" pump produces a consistent air flow and the special vibration isolating features insure that the patient rests easily. The LED and audible alarms provide critical performance date and alert a caregiver when the pressure falls below 10mmHG, guaranteeing the patient is always comfortable.

Features:

  • This combination therapy 8" mattress replacement system provides both alternating pressure and low air loss to optimize pressure redistribution and manage skin maceration
  • Mattress can operate in an alternating or static pressure mode
  • Designed to prevent, treat and manage pressure ulcers in the home, long term care, or acute care setting
  • Nylon cover is low shear, fluid-resistant, vapor permeable, quilted and zippered
  • Each one of the 20, 8" deep air bladders are easily removed and replaced via quick disconnects
  • Pillow function maintains the 3 air cells at the head of the bed in static mode for patient comfort
  • Adjustable patient comfort settings
  • CPR valve allows for rapid deflation
Specifications
  • Actual Product Weight: 30.84 lbs
  • Cover Material: Fluid Resistant Nylon
  • Overall Product Height: 8"
  • Overall Product Length: 80"
  • Overall Product Width: 36"
  • Primary Product Color: Dark Purple
  • Primary Product Material: Nylon and PVC
  • Product Weight Capacity: 350 lbs
  • Pump Airflow: 8 LPM
  • Pump Alarms: Visual/Audible
  • Pump Cycle Time: 10 Minutes
  • Pump Height: 8.1"
  • Pump Length: 11"
  • Pump Power: 110 VAC 60 Hz
  • Pump Type: Compressor
  • Pump Width: 3.9"

On Sale
On Sale $4,250.00 $2,095.00

The Med Aire Bariatric Low Air Loss Mattress Replacement System by Drive Medical is perfect for people looking for alternating pressure for Bariatric people. The alternating pressure system is optimized for pressure redistribution for people with up to Stage IV pressure ulcer, and thus was designed to prevent, treat, and manage pressure ulcers in a home, long term care, or acute care setting.

The cell-on-cell design of 10" deep air cells prevents "bottoming out" which is when the patient would sink to the bottom of the mattress. The Med Aire Bariatric Low Air Loss Mattress even provides an additional 24 hours of use in the event of a power outage. The advanced digital pump allows for a custom setting which allows the individual to set the unit to his comfort and safety needs, and will even auto return to a alternating pressure mode if the system is left on static mode for more than 2 hours. The convenient cover stretches 4 ways, is low sheer, fluid resistant, vapor permeable, quilted and zippered. In the unlikely event that one of the 20 air cells malfunction due to a puncture, they are easily removed and replaced.

The unit also has a pillow function allowing 3 air cells at the head of the bed to stay in a static mode for better comfort and easier sleep. The system has 3 distinct diagnostic alarms which tell you whether the problem is with the mattress or the pump allowing for easy and effective troubleshooting. Be sure to consider the Med Aire Bariatric Low Air Loss Mattress Replacement System for effective treatment and ideal comfort.

Features:

  • This combination therapy bariatric system provides both alternating pressure and low air loss to optimize pressure redistribution and manage skin maceration
  • Cell-on-cell design of 10" deep air cells prevents "bottoming out" and also provides up to 24 hours of power outage protection
  • Digital pump allows for customization to individual patients' comfort and safety needs, and will auto-return to alternating pressure mode if system is left on static mode for more than 2 hours
  • Low air loss holes in the central 9 bladders beneath the trunk and pelvis wick away moisture and humidity providing improved micro-climate control
  • 4-way stretch cover is low sheer, fluid-resistant, vapor permeable, quilted and zippered
  • Each one of the 20, 10" deep air bladders are easily removed and replaced
  • Pillow function maintains the 3 air cells at the head of the bed in static mode for patient comfort
  • 3 diagnostic alarms tell you whether a problem is with the mattress or the pump for more efficient servicing
  • CPR valve allows for rapid deflation
Specifications
  • Actual Product Weight: 40 lbs
  • Cover Material: Fluid Resistant Stretch
  • Overall Product Height: 10"
  • Overall Product Length: 80"
  • Overall Product Width: 48"
  • Primary Product Color: Blue
  • Primary Product Material: Nylon and PU
  • Product Weight Capacity: 750 lbs
  • Pump Airflow: 12 LPM
  • Pump Alarms: Visual/Audible
  • Pump Cycle Time: 10, 15, 20, 25 Minutes
  • Pump Power: 110 VAC 60 Hz
  • Pump Type: Compressor

On Sale
On Sale $5,850.00 $2,795.00

The Med Aire Bariatric Low Air Loss Mattress Replacement System by Drive Medical is perfect for people looking for alternating pressure for Bariatric people. The alternating pressure system is optimized for pressure redistribution for people with up to Stage IV pressure ulcer, and thus was designed to prevent, treat, and manage pressure ulcers in a home, long term care, or acute care setting.

The cell-on-cell design of 10" deep air cells prevents "bottoming out" which is when the patient would sink to the bottom of the mattress. The Med Aire Bariatric Low Air Loss Mattress even provides an additional 24 hours of use in the event of a power outage. The advanced digital pump allows for a custom setting which allows the individual to set the unit to his comfort and safety needs, and will even auto return to a alternating pressure mode if the system is left on static mode for more than 2 hours. The convenient cover stretches 4 ways, is low sheer, fluid resistant, vapor permeable, quilted and zippered. In the unlikely event that one of the 20 air cells malfunction due to a puncture, they are easily removed and replaced.

The unit also has a pillow function allowing 3 air cells at the head of the bed to stay in a static mode for better comfort and easier sleep. The system has 3 distinct diagnostic alarms which tell you whether the problem is with the mattress or the pump allowing for easy and effective troubleshooting. Be sure to consider the Med Aire Bariatric Low Air Loss Mattress Replacement System for effective treatment and ideal comfort.

Features:

  • This combination therapy bariatric system provides both alternating pressure and low air loss to optimize pressure redistribution and manage skin maceration
  • Cell-on-cell design of 10" deep air cells prevents "bottoming out" and also provides up to 24 hours of power outage protection
  • Digital pump allows for customization to individual patients' comfort and safety needs, and will auto-return to alternating pressure mode if system is left on static mode for more than 2 hours
  • Low air loss holes in the central 9 bladders beneath the trunk and pelvis wick away moisture and humidity providing improved micro-climate control
  • 4-way stretch cover is low sheer, fluid-resistant, vapor permeable, quilted and zippered
  • Each one of the 20, 10" deep air bladders are easily removed and replaced
  • Pillow function maintains the 3 air cells at the head of the bed in static mode for patient comfort
  • 3 diagnostic alarms tell you whether a problem is with the mattress or the pump for more efficient servicing
  • CPR valve allows for rapid deflation
Specifications
  • Actual Product Weight: 40 lbs
  • Cover Material: Fluid Resistant Stretch
  • Overall Product Height: 10"
  • Overall Product Length: 80"
  • Overall Product Width: 54"
  • Primary Product Color: Blue
  • Primary Product Material: Nylon and PU
  • Product Weight Capacity: 1000 lbs
  • Pump Airflow: 12 LPM
  • Pump Alarms: Visual/Audible
  • Pump Cycle Time: 10, 15, 20, 25 Minutes
  • Pump Power: 110 VAC 60 Hz
  • Pump Type: Compressor

On Sale
On Sale $5,995.00 $3,150.00

The Med Aire Bariatric Low Air Loss Mattress Replacement System by Drive Medical is perfect for people looking for alternating pressure for Bariatric people.

The alternating pressure system is optimized for pressure redistribution for people with up to Stage IV pressure ulcer, and thus was designed to prevent, treat, and manage pressure ulcers in a home, long term care, or acute care setting. The cell-on-cell design of 10" deep air cells prevents "bottoming out" which is when the patient would sink to the bottom of the mattress. The Med Aire Bariatric Low Air Loss Mattress even provides an additional 24 hours of use in the event of a power outage.

The advanced digital pump allows for a custom setting which allows the individual to set the unit to his comfort and safety needs, and will even auto return to a alternating pressure mode if the system is left on static mode for more than 2 hours. The convenient cover stretches 4 ways, is low sheer, fluid resistant, vapor permeable, quilted and zippered. In the unlikely event that one of the 20 air cells malfunctions due to a puncture, they are easily removed and replaced. The unit also has a pillow function allowing 3 air cells at the head of the bed to stay in a static mode for better comfort and easier sleep.

The system has 3 distinct diagnostic alarms which tell you whether the problem is with the mattress or the pump allowing for easy and effective troubleshooting. Be sure to consider the Med Aire Bariatric Low Air Loss Mattress Replacement System for effective treatment and ideal comfort.This combination therapy bariatric system provides both alternating pressure and low air loss to optimize pressure redistribution and manage skin maceration.

Features:

  • Cell-on-cell design of 10" deep air cells prevents "bottoming out" and also provides up to 24 hours of power outage protection
  • Digital pump allows for customization to individual patients' comfort and safety needs, and will auto-return to alternating pressure mode if system is left on static mode for more than 2 hours
  • Low air loss holes in the central 9 bladders beneath the trunk and pelvis wick away moisture and humidity providing improved micro-climate control
  • 4-way stretch cover is low sheer, fluid-resistant, vapor permeable, quilted and zippered
  • Each one of the 20, 10" deep air bladders are easily removed and replaced
  • Pillow function maintains the 3 air cells at the head of the bed in static mode for patient comfort
  • 3 diagnostic alarms tell you whether a problem is with the mattress or the pump for more efficient servicing
  • CPR valve allows for rapid deflation
Specifications
  • Actual Product Weight: 35 lbs
  • Cover Material: Fluid Resistant Stretch
  • Overall Product Height: 10"
  • Overall Product Length: 80"
  • Overall Product Width: 60"
  • Primary Product Color: Blue
  • Primary Product Material: Nylon and PU
  • Product Weight Capacity: 1000 lbs
  • Pump Airflow: 12 LPM
  • Pump Alarms: Visual/Audible
  • Pump Cycle Time: 10, 15, 20, 25 Minutes
  • Pump Power: 110 VAC 60 Hz
  • Pump Type: Compressor

On Sale
On Sale $4,995.00 $2,995.00

A Lateral Rotation Mattress System from Drive and Mason Medical aids patients who are at risk for circulation problems and pressure ulcers. With the LS9500, the turning, moving and shifting of the patient is done by the mattress itself with the option of 10 comfort levels, adjustable turning cycles and angle adjustment of up to 40 degrees. The LS9500 can also operate with an "on demand" low air loss function to provide an aerated, cool, dry sleeping surface for maximum patient comfort.

Features:

  • Turn-Style system incorporates the functions of lateral rotation and low air loss in one unit
  • The user friendly high flow control unit offers 10 comfort levels, adjustable turning cycles, and maximum turn angle adjustment of up to 40-degrees
  • The continuous feedback sensor technology of the control unit will equalize pressure and maximize patient comfort
  • The mattress is constructed of 20, 8" high split-air cells over a 2" foam base with 2, 10" high side air bolsters
  • The lateral rotation mode will assist in pulmonary blood flow and mucosal drainage, while the "on-demand" low air loss function will provide a cool and dry surface for prevention and treatment of pressure ulcers
  • The side bolsters provide the patient with optimal comfort while creating a safe environment during rotation
  • 10, 20, 30, and 60 minute adjustable turning cycles
  • 1/4, 1/2, 3/4, and full position adjustable turning positions up to 40-degrees
  • Lockout feature to protect patient settings
  • Auto-Firm feature for max inflation when transferring patient and has auto-recovery after 30 minutes
  • Audible and visual low pressure alarms
  • CPR deflation in 20 seconds
Specifications
  • Actual Product Weight: 45 lbs
  • Cover Material: Fluid Resistant Nylon
  • Overall Product Height: 10"
  • Overall Product Length: 80"
  • Overall Product Width: 36"
  • Primary Product Color: Blue
  • Primary Product Material: Fluid Resistant Nylon
  • Product Weight Capacity: 500 lbs
  • Pump Airflow: 45 LPM
  • Pump Alarms: Visual/Audible
  • Pump Power: 110 VAC 60 Hz
  • Pump Type: Compressor

On Sale
On Sale $499.00 $359.95

The product is designed to be used in the prevention, treatment and management of pressure ulcers. The newly designed pump produces consistent air flow and has LED indicators to identify normal/low pressure levels. This mattress overlay achieves low air loss, increases patient comfort and keeps the patient cool. Spring lined air tube prevents kinks and disruption in air flow. The nylon cover is water resistant, vapor permeable, machine washable and it can be secured to the mattress with straps.

Features:

  • Designed to prevent, treat, and manage pressure ulcers in the home, long term care, or acute care setting
  • Pump delivers air volume of 8 LPM
  • The nylon low shear cover material is water resistant, vapor permeable, machine washable, and secures to the overlay with straps
  • Each one of the 20, 5" deep air bladders are easily removed and replaced
  • Pillow function maintains the 3 air cells at the head of the bed in static mode for patient comfort
  • CPR valve allows for rapid deflation
  • EZ Lock/Quick Release Tubing Connector has pressure tabs that allow easy and quick disconnect
  • This combination therapy overlay system provides both alternating pressure and low air loss to optimize pressure redistribution and manage skin maceration
Specifications
  • Actual Product Weight: 17.5 lbs
  • Cover Material: Fluid Resistant Nylon
  • Overall Product Height: 5"
  • Overall Product Length: 80"
  • Overall Product Width: 36"
  • Primary Product Color: Blue
  • Primary Product Material: Nylon and PVC
  • Product Weight Capacity: 350 lbs
  • Pump Airflow: 8 LPM
  • Pump Alarms: No
  • Pump Cycle Time: 10 Minutes
  • Pump Power: 110 VAC 60 Hz
  • Pump Type: Compressor

On Sale
On Sale $499.00 $394.95

Designed to prevent and treat any stage pressure ulcer this combination therapy mattress system provides alternating pressure and low air loss to optimize pressure redistribution and help protect skin integrity. Easy to set up and use, this therapeutic support surface is ideal for home care or long term care use.Mattress system provides both alternating pressure and low air loss to optimize pressure redistribution, shear reduction, and micro-climate control.

Features:

  • 8" deep air cells are easily removed for convenient servicing
  • Control unit offers 10 minute cycles when alternating and can also be used in static mode
  • Adjustable patient weight settings allow for optimal immersion and patient comfort & compliance
  • Removable Nylon cover is fluid resistant, low shear and vapor permeable helping protect the skin from friction and moisture
  • CPR valve allows for rapid deflation
  • System includes 20 individual air cells to maximize immersion and envelopment
  • Visual alarm alerts when air pressure is low
  • Tubing quickly and easily disconnects with EZ Lock Quick Release design

Specifications:

  • Actual Product Weight: 22 lbs
  • Overall Product Height: 8"
  • Overall Product Length: 80"
  • Overall Product Width: 35"
  • Primary Product Color: Navy Blue
  • Primary Product Material: Nylon
  • Product Weight Capacity: 350 lbs
  • Pump Airflow: 8 LPM
  • Pump Alarms: Visual
  • Pump Cycle Time: 10 Minutes

On Sale
$995.00

A pre-installed motor on this ultra light electric bed from Drive Medical allows you to adjust from standard to low height, suiting your ever-changing needs. A motor near the foot section of the bed lets either the patient or caregiver choose the proper height for them. And the motor can be assembled or disassembled tool free, even while the patient is in the bed.

The bed is strong enough to withstand a weight capacity of up to 450 pounds yet features a caster that moves easily, making adjustments between 9.5"-20" deck height a cinch. In the event of a power failure, a 9-volt battery, located in the motor, can lower the head and foot sections up to nine times. A new-and-improved hand pendant includes large and easy-to-use controls.

In addition to these various features, you can expect a durable and impact-resistant product that is easy to set up out of the box. The bed and features channel frame construction with zinc coated spring deck to provide superior strength and reduced weight. The end panels are washable, making upkeep of this bed quick and easy.

Features:

  • The motor assembly can be installed and removed with patient in bed
  • Bed frame can be used with Drive's and most other manufacturers' bed ends, old and new
  • The transition box mounted on the foot section is key to interchangeability
  • The transition box allows you to change the rotation of the high/low shaft
  • Headboard is taller than footboard to better fit home decor
  • The wood grain panels are break and scratch resistant
  • Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations
  • Labels and color-coded springs assure accurate installation of side rails for patient safety
  • Unique motor is completely self-contained to reduce weight and noise
  • Easy to set up
  • Top mounted Hi/Lo crank accessibility|Height-adjustable motor comes pre-installed on the foot section
  • Caster easily moves from standard to low bed position
  • Bed, side rails, and mattress safety-tested by SGS, a nationally recognized testing facility; Satisfies all applicable FDA entrapment guidelines
  • The motor is UL approved
  • In the event of a power failure, a 9V battery, located in the hand control, can lower the head and foot sections nine times
  • New and improved hand pendant has large, easy-to-use controls
  • Hand crank located on the top of the footboard prevents bending for the caregiver when in the low position
  • Channel frame construction provides superior strength and reduced weight
  • Zinc-coated spring deck
  • Weight Capacity 450 lbs
Specifications
  • Actual Product Weight: 167 lbs
  • Batteries: 1 - 9V
  • Bed Height (Max): 20.5"; Bed Height (Min): 9"
  • Bed Height w/ Casters (Max): 23.5"
  • Bed Height w/ Casters (Min): 12"
  • Casters: 3"
  • Foot Section Height (Max): 31.5"
  • Foot Section Height (Min): 20"
  • Foot Section Height w/ Casters (Max): 34.5"
  • Foot Section Height w/ Casters (Min): 23"
  • Footboard Height (Max): 32.5"
  • Footboard Height (Min): 21.5"
  • Footboard Height w/ Casters (Max): 35.5"
  • Footboard Height w/ Casters (Min): 24.5"
  • Ground Clearance: 0.5"-12"
  • Ground Clearance w/ Casters: 3.5"-15"
  • Head Section Height (Max): 44.75"
  • Head Section Height (Min): 33.25"
  • Head Section Height w/ Casters (Max): 47.75"
  • Head Section Height w/ Casters (Min): 36.25"
  • Headboard Height (Max): 35"
  • Headboard Height (Min): 24"
  • Headboard Height w/ Casters (Max): 38"
  • Headboard Height w/ Casters (Min): 27"
  • Motor: 15037MN (Head and Foot)
  • 15033MHLN-MGBA (Hi/Low)
  • Overall Product Height: 24"
  • Overall Product Length: 88.625"
  • Overall Product Width: 34.75"
  • Primary Product Color: Brown
  • Primary Product Material: Steel
  • Product Weight Capacity: 450 lbs

On Sale $1,999.00 $1,199.00

A pre-installed motor on this ultra light electric bed from Drive Medical allows you to adjust from standard to low height, suiting your ever-changing needs. A motor near the foot section of the bed lets either the patient or caregiver choose the proper height for them. And the motor can be assembled or disassembled tool free, even while the patient is in the bed.

The bed is strong enough to withstand a weight capacity of up to 450 pounds yet features a caster that moves easily, making adjustments between 9.5"-20" deck height a cinch. In the event of a power failure, a 9-volt battery, located in the motor, can lower the head and foot sections up to nine times. A new-and-improved hand pendant includes large and easy-to-use controls.

In addition to these various features, you can expect a durable and impact-resistant product that is easy to set up out of the box. The bed and features channel frame construction with zinc coated spring deck to provide superior strength and reduced weight. The end panels are washable, making upkeep of this bed quick and easy.

Features:

  • The motor assembly can be installed and removed with patient in bed
  • Bed frame can be used with Drive's and most other manufacturers' bed ends, old and new
  • The transition box mounted on the foot section is key to interchangeability
  • The transition box allows you to change the rotation of the high/low shaft
  • Headboard is taller than footboard to better fit home decor
  • The wood grain panels are break and scratch resistant
  • Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations
  • Labels and color-coded springs assure accurate installation of side rails for patient safety
  • Unique motor is completely self-contained to reduce weight and noise
  • Easy to set up
  • Top mounted Hi/Lo crank accessibility|Height-adjustable motor comes pre-installed on the foot section
  • Caster easily moves from standard to low bed position
  • Bed, side rails, and mattress safety-tested by SGS, a nationally recognized testing facility; Satisfies all applicable FDA entrapment guidelines
  • The motor is UL approved
  • In the event of a power failure, a 9V battery, located in the hand control, can lower the head and foot sections nine times
  • New and improved hand pendant has large, easy-to-use controls
  • Hand crank located on the top of the footboard prevents bending for the caregiver when in the low position
  • Channel frame construction provides superior strength and reduced weight
  • Zinc-coated spring deck
  • Weight Capacity 450 lbs
Specifications
  • Actual Product Weight: 167 lbs
  • Batteries: 1 - 9V
  • Bed Height (Max): 20.5"
  • Bed Height (Min): 9"
  • Bed Height w/ Casters (Max): 23.5"
  • Bed Height w/ Casters (Min): 12"
  • Casters: 3"
  • Foot Section Height (Max): 31.5"
  • Foot Section Height (Min): 20"
  • Foot Section Height w/ Casters (Max): 34.5"
  • Foot Section Height w/ Casters (Min): 23"
  • Footboard Height (Max): 32.5"
  • Footboard Height (Min): 21.5"
  • Footboard Height w/ Casters (Max): 35.5"
  • Footboard Height w/ Casters (Min): 24.5"
  • Ground Clearance: 0.5"-12"
  • Ground Clearance w/ Casters: 3.5"-15"
  • Head Section Height (Max): 44.75"
  • Head Section Height (Min): 33.25"
  • Head Section Height w/ Casters (Max): 47.75"
  • Head Section Height w/ Casters (Min): 36.25"
  • Headboard Height (Max): 35"
  • Headboard Height (Min): 24"
  • Headboard Height w/ Casters (Max): 38"
  • Headboard Height w/ Casters (Min): 27"
  • Motor: 15037MN (Head and Foot)
  • 15033MHLN-MGBA (Hi/Low)
  • Overall Product Height: 24"
  • Overall Product Length: 88.625"
  • Overall Product Width: 34.75"
  • Primary Product Color: Brown
  • Primary Product Material: Steel
  • Product Weight Capacity: 450 lbs

On Sale
On Sale $1,999.00 $1,199.00

A pre-installed motor on this ultra light electric bed from Drive Medical allows you to adjust from standard to low height, suiting your ever-changing needs. A motor near the foot section of the bed lets either the patient or caregiver choose the proper height for them. And the motor can be assembled or disassembled tool free, even while the patient is in the bed.

The bed is strong enough to withstand a weight capacity of up to 450 pounds yet features a caster that moves easily, making adjustments between 9.5"-20" deck height a cinch. In the event of a power failure, a 9-volt battery, located in the motor, can lower the head and foot sections up to nine times. A new-and-improved hand pendant includes large and easy-to-use controls.

In addition to these various features, you can expect a durable and impact-resistant product that is easy to set up out of the box. The bed and features channel frame construction with zinc coated spring deck to provide superior strength and reduced weight. The end panels are washable, making upkeep of this bed quick and easy.

Features:

  • The motor assembly can be installed and removed with patient in bed
  • Bed frame can be used with Drive's and most other manufacturers' bed ends, old and new
  • The transition box mounted on the foot section is key to interchangeability
  • The transition box allows you to change the rotation of the high/low shaft
  • Headboard is taller than footboard to better fit home decor
  • The wood grain panels are break and scratch resistant
  • Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations
  • Labels and color-coded springs assure accurate installation of side rails for patient safety
  • Unique motor is completely self-contained to reduce weight and noise
  • Easy to set up
  • Top mounted Hi/Lo crank accessibility
  • Height-adjustable motor comes pre-installed on the foot section
  • Caster easily moves from standard to low bed position
  • Bed, side rails, and mattress safety-tested by SGS, a nationally recognized testing facility; Satisfies all applicable FDA entrapment guidelines
  • The motor is UL approved
  • In the event of a power failure, a 9V battery, located in the hand control, can lower the head and foot sections nine times
  • New and improved hand pendant has large, easy-to-use controls
  • Hand crank located on the top of the footboard prevents bending for the caregiver when in the low position
  • Channel frame construction provides superior strength and reduced weight
  • Zinc-coated spring deck
  • Weight Capacity 450 lbs
Specifications
  • Actual Product Weight: 167 lbs
  • Batteries: 1 - 9V
  • Bed Height (Max): 20.5"
  • Bed Height (Min): 9"
  • Bed Height w/ Casters (Max): 23.5"
  • Bed Height w/ Casters (Min): 12"
  • Casters: 3"
  • Foot Section Height (Max): 31.5"
  • Foot Section Height (Min): 20"
  • Foot Section Height w/ Casters (Max): 34.5"
  • Foot Section Height w/ Casters (Min): 23"
  • Footboard Height (Max): 32.5"
  • Footboard Height (Min): 21.5"
  • Footboard Height w/ Casters (Max): 35.5"
  • Footboard Height w/ Casters (Min): 24.5"
  • Ground Clearance: 0.5"-12"
  • Ground Clearance w/ Casters: 3.5"-15"
  • Head Section Height (Max): 44.75"
  • Head Section Height (Min): 33.25"
  • Head Section Height w/ Casters (Max): 47.75"
  • Head Section Height w/ Casters (Min): 36.25"
  • Headboard Height (Max): 35"
  • Headboard Height (Min): 24"
  • Headboard Height w/ Casters (Max): 38"
  • Headboard Height w/ Casters (Min): 27"
  • Motor: 15037MN (Head and Foot)
  • 15033MHLN-MGBA (Hi/Low)
  • Overall Product Height: 24"
  • Overall Product Length: 88.625"
  • Overall Product Width: 34.75"
  • Primary Product Color: Brown
  • Primary Product Material: Steel
  • Product Weight Capacity: 450 lbs

On Sale
On Sale $1,695.00 $995.00

A pre-installed motor on this ultra light electric bed from Drive Medical allows you to adjust from standard to low height, suiting your ever-changing needs. A motor near the foot section of the bed lets either the patient or caregiver choose the proper height for them. And the motor can be assembled or disassembled tool free, even while the patient is in the bed.

The bed is strong enough to withstand a weight capacity of up to 450 pounds yet features a caster that moves easily, making adjustments between 9.5"-20" deck height a cinch. In the event of a power failure, a 9-volt battery, located in the motor, can lower the head and foot sections up to nine times. A new-and-improved hand pendant includes large and easy-to-use controls.

In addition to these various features, you can expect a durable and impact-resistant product that is easy to set up out of the box. The bed and features channel frame construction with zinc coated spring deck to provide superior strength and reduced weight. The end panels are washable, making upkeep of this bed quick and easy.

Features:

  • The motor assembly can be installed and removed with patient in bed
  • Bed frame can be used with Drive's and most other manufacturers' bed ends, old and new
  • The transition box mounted on the foot section is key to interchangeability
  • The transition box allows you to change the rotation of the high/low shaft
  • Headboard is taller than footboard to better fit home decor
  • The wood grain panels are break and scratch resistant
  • Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations
  • Labels and color-coded springs assure accurate installation of side rails for patient safety
  • Unique motor is completely self-contained to reduce weight and noise
  • Easy to set up
  • Top mounted Hi/Lo crank accessibility
  • Height-adjustable motor comes pre-installed on the foot section
  • Caster easily moves from standard to low bed position
  • Bed, side rails, and mattress safety-tested by SGS, a nationally recognized testing facility; Satisfies all applicable FDA entrapment guidelines
  • The motor is UL approved|In the event of a power failure, a 9V battery, located in the hand control, can lower the head and foot sections nine times
  • New and improved hand pendant has large, easy-to-use controls
  • Hand crank located on the top of the footboard prevents bending for the caregiver when in the low position
  • Channel frame construction provides superior strength and reduced weight
  • Zinc-coated spring deck
  • Weight Capacity 450 lbs
Specifications
  • Actual Product Weight: 167 lbs
  • Batteries: 1 - 9V
  • Bed Height (Max): 20.5"
  • Bed Height (Min): 9"
  • Bed Height w/ Casters (Max): 23.5"
  • Bed Height w/ Casters (Min): 12"
  • Casters: 3"
  • Foot Section Height (Max): 31.5"
  • Foot Section Height (Min): 20"
  • Foot Section Height w/ Casters (Max): 34.5"
  • Foot Section Height w/ Casters (Min): 23"
  • Footboard Height (Max): 32.5"
  • Footboard Height (Min): 21.5"
  • Footboard Height w/ Casters (Max): 35.5"
  • Footboard Height w/ Casters (Min): 24.5"
  • Ground Clearance: 0.5"-12"
  • Ground Clearance w/ Casters: 3.5"-15"
  • Head Section Height (Max): 44.75"
  • Head Section Height (Min): 33.25"
  • Head Section Height w/ Casters (Max): 47.75"
  • Head Section Height w/ Casters (Min): 36.25"
  • Headboard Height (Max): 35"
  • Headboard Height (Min): 24"
  • Headboard Height w/ Casters (Max): 38"
  • Headboard Height w/ Casters (Min): 27"
  • Motor: 15037MN (Head and Foot)
  • 15033MHLN-MGBA (Hi/Low)
  • Overall Product Height: 24"
  • Overall Product Length: 88.625"
  • Overall Product Width: 34.75"
  • Primary Product Color: Brown
  • Primary Product Material: Steel
  • Product Weight Capacity: 450 lbs

On Sale
On Sale $1,425.00 $775.00

A pre-installed motor on this ultra light electric bed from Drive Medical allows you to adjust from standard to low height, suiting your ever-changing needs. A motor near the foot section of the bed lets either the patient or caregiver choose the proper height for them. And the motor can be assembled or disassembled tool free, even while the patient is in the bed.

The bed is strong enough to withstand a weight capacity of up to 450 pounds yet features a caster that moves easily, making adjustments between 9.5"-20" deck height a cinch. In the event of a power failure, a 9-volt battery, located in the motor, can lower the head and foot sections up to nine times. A new-and-improved hand pendant includes large and easy-to-use controls.

In addition to these various features, you can expect a durable and impact-resistant product that is easy to set up out of the box. The bed and features channel frame construction with zinc coated spring deck to provide superior strength and reduced weight. The end panels are washable, making upkeep of this bed quick and easy.

Features:

  • Bed frame can be used with Drive's and most other manufacturers' bed ends, old and new
  • The transition box mounted on the foot section is key to interchangeability
  • The transition box allows you to change the rotation of the high/low shaft
  • Headboard is taller than footboard to better fit home decor
  • The wood grain panels are break and scratch resistant
  • Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations
  • Labels and color-coded springs assure accurate installation of side rails for patient safety
  • Unique motor is completely self-contained to reduce weight and noise
  • Easy to set up
  • Top mounted Hi/Lo crank accessibility
  • Height-adjustable motor comes pre-installed on the foot section
  • Caster easily moves from standard to low bed position
  • The motor assembly can be installed and removed with patient in bed
  • Bed, side rails, and mattress safety-tested by SGS, a nationally recognized testing facility; Satisfies all applicable FDA entrapment guidelines
  • The motor is UL approved
  • In the event of a power failure, a 9V battery, located in the hand control, can lower the head and foot sections nine times
  • New and improved hand pendant has large, easy-to-use controls
  • Hand crank located on the top of the footboard prevents bending for the caregiver when in the low position
  • Channel frame construction provides superior strength and reduced weight
  • Zinc-coated spring deck
  • Weight Capacity 450 lbs
Specifications
  • Actual Product Weight: 167 lbs
  • Batteries: 1 - 9V
  • Bed Height (Max): 20.5"
  • Bed Height (Min): 9"
  • Bed Height w/ Casters (Max): 23.5"
  • Bed Height w/ Casters (Min): 12"
  • Casters: 3"
  • Foot Section Height (Max): 31.5"
  • Foot Section Height (Min): 20"
  • Foot Section Height w/ Casters (Max): 34.5"
  • Foot Section Height w/ Casters (Min): 23"
  • Footboard Height (Max): 32.5"
  • Footboard Height (Min): 21.5"
  • Footboard Height w/ Casters (Max): 35.5"
  • Footboard Height w/ Casters (Min): 24.5"
  • Ground Clearance: 0.5"-12"
  • Ground Clearance w/ Casters: 3.5"-15"
  • Head Section Height (Max): 44.75"
  • Head Section Height (Min): 33.25"
  • Head Section Height w/ Casters (Max): 47.75"
  • Head Section Height w/ Casters (Min): 36.25"
  • Headboard Height (Max): 35"
  • Headboard Height (Min): 24"
  • Headboard Height w/ Casters (Max): 38"
  • Headboard Height w/ Casters (Min): 27"
  • Motor: 15037MN (Head and Foot)
  • 15033MHLN-MGBA (Hi/Low)
  • Overall Product Height: 24"
  • Overall Product Length: 88.625"
  • Overall Product Width: 34.75"
  • Primary Product Color: Brown
  • Primary Product Material: Steel
  • Product Weight Capacity: 450 lbs

On Sale