CONSUMER LIMITED LIFETIME AND SEVEN YEAR WARRANTY

GOLDEN, through its authorized distributor/service organization, warrants this chair to original consumer only, against defects in material or workmanship as follows:

LIFT MECHANISM, RECLINE MECHANISM AND CHAIR FRAME LIMITED WARRANTY

GOLDEN, warrants for the lifetime of the chair by the original consumer to repair or replace at Golden’s option the Lift Mechanism, Chair Frame and Recline Mechanism. Labor to replace these parts is subsidized on all models for three years. The Capri and Monarch are limited to six months subsidized labor.
GOLDEN, shall not be responsible or obligated to pay for any cost or expense for examination of any warranted parts nor is Golden to pay for costs for transportation, handling and packaging of the parts or components.

THREE YEAR ELECTRICAL PARTS WARRANTY

GOLDEN, warrants the electrical parts of this chair against defects to original consumer only, for a period of three years from the date of original purchase by a consumer. The Monarch chair has electrical parts warranty of 2 years. The Capri is limited to 1 year electrical parts warranty. Labor to replace these parts is subsidized for one year on all models except Capri and Monarch, which are limited to 6 months.

GOLDEN, shall not be responsible or obligated to pay for any costs or expenses for examination of any Warranted parts nor is Golden to pay cost for transportation, handling and packaging of the parts or components.

ELECTRICAL PARTS LIMITED WARRANTY FOURTH THROUGH SEVENTH YEAR

During the period beginning with the expiration of the full three year parts warranty offered above and continuing through the seventh year after date of original purchase by a consumer, GOLDEN will warrant the electrical parts on the following pro- rated basis. Year 4 earns a 35% discount off suggested retail price. Year 5 earns a 25% discount. Year 6 a 15% discount and year 7 a 5% discount. By way of example, a part costing $100.00 that needs replacement in year 4 would cost $65.00. GOLDEN shall not be responsible or obligated to pay for any costs or expenses for examination and/or service of any warranted part or to pay for costs of transportation, handling and packaging of the chairs and/or parts or components. The Capri and Monarch are excluded from this portion of the warranty.

TERMS APPLICABLE TO WARRANTIES
GOLDEN will, at its option, repair and/or replace the defective parts and/or components provided that the warranty parts have

not been subjected to misuse, abuse or improper service by the consumer, have not been damaged in transit or handling and / or have not been altered or repaired by unauthorized representatives. This warranty does not include costs for unnecessary service calls, i.e., in-home service calls solely for the purpose of educating the consumer about the product, or finding an unsatisfactory power connection, etc. Exceeding the weight capacity of the chair will void the warranty.

Jr. Petite & Small Models.......................300 lbs. Capri................................................325 lbs.

PR931-SMA, PR931-MED, PR931-LAR....350 lbs. Medium, Large & Tall Models.................375 lbs.

Cambridge, Williamsburg, Regal...............375 lbs. PR501S23.......................................... 375 lbs. Dual Motor 26” & 28” Wide Models.........500 lbs.

In the event that the product does not conform to this warranty at any time while this warranty is in effect, Golden will correct the defect in conformity with the Consumer Limited Lifetime and Seven Year Warranty. THE LIMITED LIFETIME AND SEVEN YEAR WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED, OR ARISING BY OPERATION OF LAW INCLUDING, BUT NOT LIMIITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you.

GOLDEN shall not be liable for any incidental or consequential damages or for any other damage or loss not contained in this warranty.

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. All warranty claims must be approved by Golden Technologies before any service is performed.
Warranty is valid in all 50 states, Canadian Provinces and Puerto Rico.

Golden Technologies 401 Bridge Street

Old Forge, PA 18518 (P) 800-624-6374 (F) 800-628-5165

AutoDriveTM Hand Control Factory Default Reset & Calibrations

1. Power Disruption Calibration - When power to a 4 or 5-zone recliner is disrupted, the backrest may not return to a
   fully upright position and/or the footrest may not fully extend. The Power Disruption Calibration should be performed to restore normal function of the chair. Models built before 2021 may be more sensitive to such power fluctuations.
   If power disruptions are frequent in your area, we recommended a separate battery backup that can be purchased at your local office supply store. This calibration must also be performed when electrical components are replaced or if the motor falls out of sync with the control box.

2. Position Accuracy Calibration - Depending on use over time, the Position Control buttons (REJUV, SIT, SLEEP, TV, ZG) may bring the chair to positions that are slightly different than those that are originally set. The Position Accuracy Calibration reminds the recliner of its FULL range of motion by taking the chair to Trendelenburg position, allowing it to glide into its original positioning with accuracy.

3. Factory Default Reset - If the Position Control buttons (REJUV, SIT, SLEEP, TV, ZG) do not take you to your personalized or programmed positions due to a power supply disruption, you can either:
   a) reprogram each button to your personalized position (see Owner’s Manual for instructions)
   b) return all Position Control buttons to the positions programmed by the factory by performing the Factory Default Reset listed below.

Hand Control Procedures for the PR515 & PR761

(ZK3100-C5M)

1. Power Disruption Calibration

Press and hold buttons A, C, and D at the same time until chair stops moving. Continue to hold C all three buttons for an additional 5 seconds before releasing.

B 2. Positioning Accuracy Calibration

Press and hold button C until the footrest is fully extended. Then press and hold button A until the backrest is fully reclined.

3. Factory Default Reset

Press and hold the M button until lights on hand control flash. Within 5 seconds, press A and then press B.

Hand Control Procedures for the PR632, PR446 & PR448

(ZK3200-HC)

1. Power Disruption Calibration
Press and hold buttons A and C at the same time until chair stops moving. Continue to hold all three buttons for an additional 5 seconds before releasing.

B

(ZKAD-5)

1. Hand Control Calibration

This hand control cannot be calibrated in the field. If the lights on this hand control are flashing in sets of two, three or four, contact Golden lift chair technical service at (800) 624-6374 x502 for assistance.

2. Positioning Accuracy Calibration

Press and hold button B until the footrest is fully extended. Then press and hold button A until the backrest is fully reclined.

3. Factory Default Reset

Press and hold the M button until lights on hand control flash. Within 5 seconds, press A and then press B.